Post by Gareth on Jan 28, 2011 8:21:17 GMT
Been looking at wireless DMX for a while, however the recievers need a power supply too, which kind of defeats the point RE: set up times.
However I've just seen a Wireless Light Controller
Wireless remote control for all your light effects; control your light effects exactly the same way as our CA8 hand controller, but without any wire cables. The set contains two parts, a small wireless remote to contril and a wireless reciever with magnetic back panel can be easily fixed to the enclosure of the light effect with metal case. Maximum working distance: up to 100m. Please check that this will work with your lights before purchase.
Wireless remote control for your all your light effects*: controls your light effects exactly the same way as our CA-8 hand controller but
without any wire!
This set contains 2 parts:
- RF-8T: a small, wireless remote to control up to 5 different effects!!!
- RF-8R: wireless receiver with magnetic back panel can be easily fixed to the enclosure of a light effect with metal case.
Three control buttons for optimal control of all kinds of different light effects:
- STANDBY: switch the output of each unit on/off
- MODE: different working modes can be selected (audio, auto, fast, slow, …)
- FUNCTION: gobo/color select, dimming, strobe, …
Always in control of your light effects, even while they are used in master/slave setup: simply connect the RF-8R to the master.
Maximum working distance: up to 100m
Working frequency: 433,92MHz
Data connector: DIN 5pin
Specifications:
RF-8R
- Power Input: pin1 = 5Vdc ~ pin4 = GND
- Size (box): W/60 x H/105 x D/24.5 mm
- Weight: 160 g
RF-8T
- Power Input: 12V battery (type = A23 or MN21)
- Size: W/46,8 x H/101.3 x D/17.3 mm
- Weight: 60 g
The main lights I would want to use this with are the Acme iM-5s Moving Heads.
I've emailed
support@terralec.com - waiting for a reply.
info@wawinternational.com - waiting for a reply.
However I've just seen a Wireless Light Controller
Wireless remote control for all your light effects; control your light effects exactly the same way as our CA8 hand controller, but without any wire cables. The set contains two parts, a small wireless remote to contril and a wireless reciever with magnetic back panel can be easily fixed to the enclosure of the light effect with metal case. Maximum working distance: up to 100m. Please check that this will work with your lights before purchase.
Wireless remote control for your all your light effects*: controls your light effects exactly the same way as our CA-8 hand controller but
without any wire!
This set contains 2 parts:
- RF-8T: a small, wireless remote to control up to 5 different effects!!!
- RF-8R: wireless receiver with magnetic back panel can be easily fixed to the enclosure of a light effect with metal case.
Three control buttons for optimal control of all kinds of different light effects:
- STANDBY: switch the output of each unit on/off
- MODE: different working modes can be selected (audio, auto, fast, slow, …)
- FUNCTION: gobo/color select, dimming, strobe, …
Always in control of your light effects, even while they are used in master/slave setup: simply connect the RF-8R to the master.
Maximum working distance: up to 100m
Working frequency: 433,92MHz
Data connector: DIN 5pin
Specifications:
RF-8R
- Power Input: pin1 = 5Vdc ~ pin4 = GND
- Size (box): W/60 x H/105 x D/24.5 mm
- Weight: 160 g
RF-8T
- Power Input: 12V battery (type = A23 or MN21)
- Size: W/46,8 x H/101.3 x D/17.3 mm
- Weight: 60 g
The main lights I would want to use this with are the Acme iM-5s Moving Heads.
I've emailed
support@terralec.com - waiting for a reply.
info@wawinternational.com - waiting for a reply.